A beautifully handmade jewelry box with ample size ,graceful curves, and sleek design. I used some maple with slight ambrosia to showcase the front of the box and rounded the outer face of the front and back with a round over bit on the router table adding extra dimension. The ambrosia is very prevalent on the right bottom drawer and in the immediate area. I applied 4 coats of gloss polyurethane sanding with 220 grit sandpaper between coats for a superior sheen. The drawers are double lined with flock for a professional and velvety look.This box is pretty large for a bandsaw box and measures 14 inches wide x 7 inches tall x 5 and a half inches deep.